Vol17no1pa1

References
[1] Lee, J. H. and J. W. Lee. “Kinetic parameters estimation for cure reaction of epoxy based vinyl ester resin.”, Polymer Engineering and Science 34(9):742-749, 1994.
[2] Dave, R., J. L. Kardos, and M. P. Dudukovic. Polymer composite 8: 29, 1987 .
[3] Halpin, J. C., J. L. Kardos, and M. P., Dudukovic”, Processing science: an approach for prepreg composite system”, Pure and Applied Chemistry, 55 : 893 – 906, 1983.
[4] Kenny, J. M., A. Maffezzoli, and L. Nicolais, “A model for the thermal chemorheological behavior of thermoset processing (II) unsaturated polyester based composites”, Composites Science and Technology, 38: 339-358, 1990
[5] Kenny, J. M. and A. Trivisano, Polymer Engineering and Science 31:1426, 1991.

Tikrit Journal of Engineering Sciences (2010) 17(1) 1- 9

Mathematical Model For Autoclave Curing of Unsaturated Polyester Based Composite Materials

Adnan A. Abdul Razak
Chemical Eng. Dept., University of Technology, Iraq

Abstract

Heat transfer process involved in the autoclave curing of fiber-reinforced thermosetting composites is investigated numerically. A model for the prediction of the temperature and the extent of the reaction across the laminate thickness during curing process in the autoclave of unsaturated polyester based composite has been developed. The governing equation for one dimensional heat transfer, and accounting for the heat generation due to the exothermic cure reaction in the composites had been used.  It was found that the temperature at the central of the laminate increases up to the external imposed temperature, because of the thermal conductivity of the resin and fiber. The heat generated by the exothermic reaction of the resin is not adequately removed; the increase in the temperature at the center increases the resins rate reaction, which in turn generates more heat.

Download Full-text PDF

Keywords: Mathematical model, autoclave, curing, composite, unsaturated poly ester.

How to cite

TJES: Abdul-Razak AA. Mathematical model for autoclave curing of unsaturated polyester based composite materials. Tikrit Journal of Engineering Sciences 2010; 17 (1): 1-9.
APA: Abdul-Razak, A. A. (2010). Mathematical model for autoclave curing of unsaturated polyester based composite materials. Tikrit Journal of Engineering Sciences, 17(1), 1-9.
Loader Loading...
EAD Logo Taking too long?
Reload Reload document
| Open Open in new tab

Download