vol24No14

Keywords:  Mixed convection, forward-facing double steps, heat transfer enhancement, nano fluids.

References
1. Griebl M, Dornseifer T, Neunhoeffer T. Numerical simulations in fluid dynamic.Philadephia: SIAM;1998.
2. Daungthongsuk W, Wongwises S. A critical review of convective heat transfer of nanofluids. Renewable and Sustainable Energy Reviews 2007;11(5):797-817.
3. Wang XQ, Mujumdar AS. Heat transfer characteristics of nanofluids: a review. International Journal of Thermal Sciences 2007;46(1):1-19.
4. Al-aswadi AA, Mohammed HA, Shuaib NH, Campo A. Laminar forced convection flow over a backward facing step using nanofluids. International Communications in Heat and Mass Transfer 2010;37(8):950- 957.
5. Mohammed HA, Al-aswadi AA, Shuaib NH, Saidur R. Mixed convective flows over backward-facing step in a vertical duct using various nanofluids-buoyancy assisting case. In acceptance to Thermo Physics and Aeromechanics 2010; Springer, 2010.
6. Abu-Mulaweh HI, Armaly BF, Chen TS. Measurements in buoyancy-opposing laminar flow over a vertical forward-facing  step. International Journal of Heat Mass Transfer 1996;39:1805-1813.

 7. Abu-Mulaweh HI. Turbulent mixed  convection flow over a forward-facing stethe effect of step heights. International Journal of Thermal Sciences 2005;44:155–162.

8. Abu-Mulaweh HI. Effects of backward- and forward-facing steps on turbulent natural convection flow along a vertical flat plate. International Journal Thermal Science 2002;41:376–385.

9. Abu-Mulaweh HI, Armaly BF, Chen TS. Measurements of laminar mixed convection in boundary-layer flow over horizontal and inclined backward-facing steps. International Journal of Heat Mass Transfer 1995;36:1883-1895.
10. Chiba K, lshida R, Nakamura K. Mechanism for entry flow instability through a forward-facing step channel. Journal of Non-Newtonian Fluid Mechanical 1995;57:271- 282

11.Hattori H, Nagano Y. Investigation of turbulent boundary layer over forwardfacing step via direct numerical simulation. International Journal of Heat and Fluid Flow 2010;31:284–294.

12. Largeau JF, Moriniere V. Wall pressure fluctuations and topology in separated flows over a forward-facing step. Experimental Fluids 2007;40:42-21.
13. Yılmaz I, Öztop HF. Turbulence forced convection heat transfer over double forward facing step flow. International Communications in Heat and Mass Transfer 2006;33:508–517.
14. Dutta P, Dutta S. Effect of baffle size, perforation, and orientation on internal heat transfer  nhancement. International Journal of Heat and Mass Transfer 1998;41(19): 3005-3013.
15. Yang YT, Hwang CZ. Calculation of turbulent flow and heat transfer in a porousbaffled
channel. International Journal of Heat and Mass Transfer 2003;46(5): 771- 780.
16. Nie JY, Hsieh H. Effects of a baffle on separated convection flow adjacent to backward-facing step. International Journal of Thermal Sciences 2009;48(3):618-625.
17. Lin JT, Armaly BF, Chen TS. Mixed convection heat transfer in inclined backward-facing step flows. International Journal of Heat and Mass Transfer 1991;34:1568-1571

18.Hong B, Armaly, BF, Chen TS. Laminar mixed convection in a duct with a International Journal Heat Mass Transfer 1993;36:3059-3067.
19. Chiang TP, Sheu TWH, Tsai SF. Topological flow structures in backwardfacing step channels. Computers & Fluids 1997;26:321-337.
20. Abu-Nada E. Application of nanofluids for heat transfer enhancement of separated  step. International Journal of Heat and Fluid Flow 2008;29(1):242-249.
21. Khanafer K, Vafai K, Lightstone M. Buoyancy-driven heat transfer enhancement in a two- imensional enclosure utilizing nanofluids. International Journal of Heat and Mass Transfer 2003; 46:3639-3653.
22. Anderson JD. Computational fluid dynamics: the basics with applications. USA: McGraw-Hill; 199

23.Patankar SV. Numerical heat transfer and fluid flow. Hemisphere Publishing Corporation, Taylor and Francis Group; 1980.

24. Ghasemim B, Aminossadati SM. Brownian motion of nano particles in a triangular enclosure with natural convection. International Journal of Thermal Sciences 2010;49:931-940.

25. Vajjha RS, Das DK. Experimental determination of thermal conductivity of three nano fluids nddevelopment of new correlations. International Journal of Heat and Mass Transfer 2009;52(21-22):4675- 4682. 26. Corcione M. Heat transfer features of buoyancy-driven nano fluids inside rectangular enclosures differentially heated at the sidewalls. International Journal of Thermal Sciences 2010;49:1536-1546

 

Tikrit Journal of Engineering Sciences (2017) 24(1) 1- 10

Laminar Mixed Convective Nano fluid Flow in a Channel with Double Forward Facing Steps: A Numerical Simulation Study

Omar A. Hussein Chemical Engineering Dept., College of Engineering, Tikrit University, Iraq

DOI: http://dx.doi.org/10.25130/tjes.24.2017.04

Abstract

Predictions are reported for mixed convection using various types of nanofluids over forward-facing double steps in a duct. The continuity, momentum and energy equations are discretized and the simple algorithm is applied to link the pressure and flow fields inside the domain. Different types of nanoparticles Al2O3, CuO, SiO2 and ZnO, with different volume fractions in range of 1-4% and different nanoparticles diameter in the range of 20 – 80nm in base fluid (water) were used. Numerical investigations are conducted using finite volume method. In this study, different parameters such as the geometrical specifications (different steps heights in the range of h1= 0.01m-0.04m and h2 = 0.03m-0.06m for FFS) are used. Different Reynolds numbers in the range of 50-2000 (laminar flow) are investigated to identify their effects on the heat transfer and fluid characteristics. The results indicate that SiO2-water has the highest Nusselt number followed by -water, -water and ZnO-water. The Nusselt number increases as the volume fraction increases but it decreases as the nanoparticles diameter increases. The velocity magnitude
increases as the density of nanofluids decreases. The recirculation region and the Nusselt number increase as the step height, Reynolds number, and the volume fraction increase.

Download Full-text PDF

How to cite

APA: Jafar, S., & Abdel-Rahman, E. (2017). Effect of Water Content, Temperature and NaCl on CO2 Corrosion of Carbon Steel (A106B) in Iraqi Crude Oil. Tikrit Journal Of Engineering Sciences, 24(1), 1-10. doi:10.25130/tjes.v24i1.692
MLA: Jafar, Saad Ahmed, & Enaam Y. Abdel-Rahman. “Effect of Water Content, Temperature and NaCl on CO2 Corrosion of Carbon Steel (A106B) in Iraqi Crude Oil.” Tikrit Journal of Engineering Sciences [Online], 24.1 (2017): 1-10. Web. 24 Jun. 2018
ABNT:  JAFAR, S., ABDEL-RAHMAN, E.. Effect of Water Content, Temperature and NaCl on CO2 Corrosion of Carbon Steel (A106B) in Iraqi Crude Oil. Tikrit Journal of Engineering Sciences, North America, 24, oct. 2017. Available at: <http://tj-es/index.php/tjes/article/view/692/306>. Date accessed: 24 Jun. 2018.