TJES: Abbas JK, Al-Luhaibi HM .Influence of Iron Furnaces Slag on Collapsibility and Shear Strength of Gypseous Soil. Tikrit Journal of Engineering Sciences 2020; 27(1): 65- 71.
References
[1] Muhauwiss FM. Physical Properties of Gypseous Soil after Gypsum Removal using EDTA Solution. Tikrit Journal of Engineering Sciences. 2018; 25(2): 68 – 73
[2] Al-Busoda BS. Studies on the behavior of gypseous soil and its treatment during loading. M. Sc. Thesis, University of Baghdad, 1999.
[3] Al-Mufty AA. Effect of gypsum dissolution on the mechanical behavior of gypseous soils. Ph. D. Thesis, Civil Eng. Dep., University of Baghdad, Baghdad: University of Baghdad, 1997.
[4] Mahmood. Study of Gypsum Content of Soil at Selected Sites in Basrah Governorate South of Iraq for Engineering Purposes, Journal of Basrah Researches (Sciences). 2011; 37: 10-21.
Tikrit Journal of Engineering Sciences (2020) 27(1) 65- 71.
Influence of Iron Furnaces Slag on Collapsibility and Shear Strength of Gypseous Soil
Jawdat K..Abbas * Hamad M..Al-Luhaibi
DOI: http://dx.doi.org/10.25130/tjes.27.1.09
Abstract
Gypseous soil is one of the soils that suffer from problems and suffers from a reduction of shear strength and collapse when exposed to water immersion or water filtration in it. Many researchers have tried to solve these problems in different ways and by using many materials as additives to improve the performance and efficiency of this soil. In this research, the behavior of soil with a high content of gypsum (61.49%) is examined, using iron slag which is a by-product of the iron making process in melting furnaces, used as an additive in proportions (2, 4, 6, 8, 10., 12) %, by dry mixing method with soil. Tests are carried out to determine the effect of this substance on the shear strength parameters. The effect of water immersion on soil cohesion (c) is reduced until it reaches (c) in the case of immersion a value very close to the value in the dry state at slag ratio (10) %. This is the optimum ratio of slag to improve the value of (c). Whereas for the value of (ø), with the increase of the slag rate for both wet and dry cases, the value of (ø) increases, where (ø) reaches the highest value at; the slag rate (10) % for the dry state, and the slag rate (8) % for the soaked case. Whereas for the collapse potential (Cp), adding the slag reduces the value of the soil collapse potential (Cp), from (10.6) to the soil without additives until (0.95) for the slag rate (12) %. Then the soil becomes problematic soil.
879 Downloads |
Keywords: Collapsible soil Iron furnaces slag Gypseous soil Shear strength Soaking.
Related Articles